Renesas R7FS5D97E3A01CFP QFP(100) Device

Adapters for Automated Programmers

6th Gen	7th Gen	8th Gen	9th Gen	Flashstream
			FX4ASMR100LQPTZA, FASMR100LQPTZA

Adapters for Manual Programmers

6th Gen	7th Gen	8th Gen	9th Gen	Flashstream
			FX4ASMR100LQPTZA, FASMR100LQPTZA

Adapters for Engineering Programmers

4th Gen	6th Gen	7th Gen	9th Gen	Silicon Sculptor
			FX4ASMR100LQPTZA, FASMR100LQPTZA

Last Updated: 09/26/2022

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type:	Renesas Synergy Platform
Device Size:	2 MB Code Flash + 64kB Data Flash
Algorithm Programming Method:	Device Boot Firmware w/ Two-wire UART

Memory Organization:

*Memory Type*	**Attributes^()***	Included in default Range (Y/N)	DUT Physical Byte Address(hex) (if this area is selected/Activated)	*BPWin Buffer Byte Address(hex)*
Code Flash	R/W/E	Yes	0000_0000 – 001F_FFFF	0000_0000 – 001F_FFFF
Data Flash	R/W/E	No	4010_0000 – 4010_FFFF	4010_0000 – 4010_FFFF

Default Algorithm Range	—	—	0000_0000 – 001F_FFFF	0000_0000 – 001F_FFFF

* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under ‘Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.
Special Device Considerations:

1.	Option Function Select Register is located in Code Flash address 0400h – 043Bh.
	Programming the Option Function Select Register may disable access via this algorithm .
2.	Data Flash memory range requires a full image with no blank areas.



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

8-bit Bytes	1074855936
Manufacturer	Renesas
Packages	QFP(100)
Part Number	R7FS5D97E3A01CFP
Set programming	Yes
Vcc(program)	3.3
Package