Renesas uPD70F3571GBA-GAH-AX QFP(64) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: 3-Wire Serial I/O Mode. 384kB Code Flash. Device Address range 00000h-5FFFFh is mapped to Data Pattern addresses 00000h-5FFFFh. 32kB Data Flash. Device Address range FE000000h-FE007FFFh is mapped to Data Pattern addresses 2000000h-2007FFFh. Erase function will erase the entire device. Erased Data Flash memory area is filled with random data.Erase function for a Blank secured device is not supported. Set OCD ID is currently not supported. The Option Byte 0 can be set under Device->Configure and programmed with Secure command. The Security Byte can be set under Device->Configure and programmed with Secure command. Security for this device cannot be verified. Security Byte: Setting Bit 1 to 0 will prohibit Boot block cluster overwrite Setting Bit 2 to 0 will prohibit Block Erase. Setting Bit 4 to 0 will disable Write Setting Bit 5 to 0 will disable Read for flash programmer interface. Bits 0 3 6 and 7 are reserved and fixed to 1. Bit 4 and 5 can be erased through Block Erase but once bit 2 is programmed to 0 the whole chip is secured and no further operations can be performed. Once Bit 1 is programmed to 0 the boot block specified are secured and no further operations can be performed.