+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Renesas uPD78F0847GKA-GAK-G QFP(80) Device

Adapters for Automated Programmers

8th Gen 9th Gen
FVE4ASMR80QFPE, FVE4ASMR80QFPE FVE4ASMR80QFPE

Adapters for Manual Programmers

8th Gen 9th Gen
FVE4ASMR80QFPE, FVE4ASMR80QFPE FVE4ASMR80QFPE

Adapters for Engineering Programmers


Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT:

Device Type: 78K0/DF2 8-Bit Single-Chip Microcontrollers
Device Size: 60KB Flash Memory
Algorithm Programming Method: Dual-wire UART

Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address (hex)(if this area is selected/Activated) BPWin Buffer Byte Address (hex)
Flash ROM R/W/E Yes 0000_0000 – 0000_EFFF 0000_0000 – 0000_EFFF
Default Algorithm Range 0000_0000 – 0000_EFFF 0000_0000 – 0000_EFFF

*R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Special Device Considerations:

Security Data Frame Description
Security Flag Set Bit 0 to 0 will disable Chip Erase Set Bit 1 to 0 will disable Block Erase Set Bit 2 to 0 will disable Program. Bit 3 should always be set to 1 since this device doesn’t support Read operation. Set Bit 4 to 0 will disable Boot block rewrite. Bits 5 to 7 are reserved and should be set to 1s. Bits 1 & 2 can be erased through Chip Erase but once bit 0 or 4 are programmed to 0 the whole chip is secured and no operation can be done on it.

Boot Cluster Boot cluster last block number (fixed to 03H)Fixed value determined by 78K0/Dx2 Firmware information app note
1. Security Data Frame can manually be set under Device > Configure and programmed with Secure command.
2. Serialization is not supported.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

8-bit Bytes

61440

Manufacturer

Renesas

Packages

QFP(80)

Part Number

uPD78F0847GKA-GAK-G

Set programming

Yes

Vcc(program)

3.3

Package