Adapters for Automated Programmers
8th Gen | 9th Gen |
FVE4ASMR80QFPE, FVE4ASMR80QFPE | FVE4ASMR80QFPE |
Adapters for Manual Programmers
8th Gen | 9th Gen |
FVE4ASMR80QFPE, FVE4ASMR80QFPE | FVE4ASMR80QFPE |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
Device Type: | 78K0/DF2 8-Bit Single-Chip Microcontrollers |
Device Size: | 60KB Flash Memory |
Algorithm Programming Method: | Dual-wire UART |
Memory Organization:
Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address (hex)(if this area is selected/Activated) | BPWin Buffer Byte Address (hex) |
Flash ROM | R/W/E | Yes | 0000_0000 – 0000_EFFF | 0000_0000 – 0000_EFFF |
Default Algorithm Range | — | — | 0000_0000 – 0000_EFFF | 0000_0000 – 0000_EFFF |
*R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Special Device Considerations:
Security Data Frame | Description | ||
Security Flag | Set Bit 0 to 0 will disable Chip Erase Set Bit 1 to 0 will disable Block Erase Set Bit 2 to 0 will disable Program. Bit 3 should always be set to 1 since this device doesn’t support Read operation. Set Bit 4 to 0 will disable Boot block rewrite. Bits 5 to 7 are reserved and should be set to 1s. Bits 1 & 2 can be erased through Chip Erase but once bit 0 or 4 are programmed to 0 the whole chip is secured and no operation can be done on it.
Boot Cluster |
Boot cluster last block number (fixed to 03H)Fixed value determined by 78K0/Dx2 Firmware information app note |
|
1. | Security Data Frame can manually be set under Device > Configure and programmed with Secure command. | |
2. | Serialization is not supported. |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
8-bit Bytes | 61440 |
---|---|
Manufacturer | Renesas |
Packages | QFP(80) |
Part Number | uPD78F0847GKA2-GAK-G |
Set programming | Yes |
Vcc(program) | 3.3 |
Package |