Renesas-M M30260F8AGP QFP(48) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: Microcomputer Flash Memory Version.This algorithm is written in parallel I/O mode. In the Data Pattern4K-byte Boot ROM is mapped to 00000h-00FFFh.4K-byte Data ROM (block A & B) is mapped to 0F000h-0FFFFh64K-byte User ROM is mapped to F0000h-FFFFFh.The User Boot and Data ROMs are selected in the Configure Options.Data Pattern locations 01000h-0EFFFh and 10000h-EFFFFh are not used and should be filled with FFh.Data Pattern locations FFE00h-FFFFFh are special.Data Pattern locations FFFFEh-FFFFFh is the security word. If secured standalone Verify and Compare will fail.Config Options allow the individual ROM sections to be selected for device operations. Before executingany command at least 1 Operations Area must be selected.The Boot ROM area of the device has a standard serial I/O modecontrol program stored in it when shipped from the factory.Therefore if the device is going to be used in standard serial I/O modedo not rewrite the Boot ROM area.