Renesas-M M302A0F2GP QFP(48) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48TQI | FASM48TQI |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM48TQI, FASM48TQI, WASM48TQI (repl.) | FSM48TQI, FASM48TQI, WASM48TQI (repl.) | WASM48TQI |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48TQI, FASM48TQI, WASM48TQI (repl.) | FSM48TQI, FASM48TQI, WASM48TQI (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: This algorithm is written in parallel I/O mode.In the buffer the address is in byte mode (8 bit). 4K-byte Boot block memory is mapped to 000h-FFFh.4K-byte Data Block (block A and B) is mapped to F000h-FFFFhUser area is divided into several blocks and they are mapped to F8000h-FFFFFh.Buffer locations 1000h-EFFFh and 10000h-F7FFFh are not used and should be filled with FFh.Buffer locations FFE00h-FFFFFh are special.programming incorrect data would cause the part to stop communication.Device Configure Options allow the individual ROM sections to be selected for device operations. Before executingany command at least 1 Operations Area must be selected.The Boot ROM area of the device has a standard serial I/O modecontrol program stored in it when shipped from the factory.Therefore if the device is going to be used in standard serial I/O modedo not rewrite the Boot ROM area.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Renesas-M |
|---|---|
| Packages | QFP(48) |
| Part Number | M302A0F2GP |
| Vcc(program) | 3.3 |
| Package |