Renesas-M M37542F8-FP SOIC(36) Device
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM42SC, FSM42SB | FSM42SC, FSM42SB |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM42SC, FSM42SB | FSM42SC, FSM42SB |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: In the Buffer 4K-byte Boot ROM memory is mapped to 0000h-0FFFh.4K-byte Data ROM (block A and B) is mapped to 7000h-7FFFhUser ROM is divided into several blocks and they are mapped to 8000h-FFFFh.The User Boot and Data ROMs are selected in the Configure Options.Buffer locations 1000h-6FFFh are not used and should be filled with FFh.Buffer locations FF00h-FFFFh are special. Programming incorrect data could causethe part to stop communicating. Buffer location FFDBh is the security word.Config Options allow the individual ROM sections to be selected for device operations.Before executing any command at least 1 Operations Area must be selected.The Boot ROM area of the device has a standard serial I/O mode control programstored in it when shipped from the factory. Therefore if the device is going tobe used in standard serial I/O mode do not rewrite the Boot ROM area.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 65536 |
|---|---|
| Manufacturer | Renesas-M |
| Packages | SOIC(36) |
| Part Number | M37542F8-FP |
| Vcc(program) | 5 |
| Package |