SanDisk SDIN7DU2-16G(FVE4SMISP-A) ISP(60) Device

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: This is a custom algorithm. This algorithm can program data into Boot Area Partitions. Boot Area Partition 1 is mapped to Data Pattern: 000000000h-0001FFFFFh and Boot Area Partition 2 is mapped to Data Pattern: 000200000h-0003FFFFFh. General Purpose Partitions 1-4 if any are mapped directly after above mentioned boot partitions. This is followed by User Data Area. Sizes and attributes of General Purpose Partitions 1-4 can be set under Device->Settings. The size of each partition is defined to be multiple of ‘High Capacity Write Protect Group Size’. ‘High Capacity Write Protect Group Size’ of this device is 32MByte. Default device range is set to (000400000h – 3AB7FFFFFh). It is recommended to adjust the ‘High Device Address’ under Device->settings to match the size of the data file (taking into account boot partitions’ offsets). 16GB MMC Card. Currently 30777344 sectors are supported. Sector Count in the Extended CSD Register of the device might be less than the supported number of sectors. Ranges selectable under Device->Range must be aligned to 32768 device sectors. Each physical sector on the device has 512 bytes. Erased memory content for the device is 00h. Serialization is not supported for this device and should not be used. If certain partitions are included in erase operation all the selected partition(s) will be erased. Please connect device pins to socket module through connector J9 or J10 as follows: