Atmel AT45DB642D-CNU(1024 byte page) LAP(8) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: 64-megabit DataFlash.This algorithm supports 1024 bytes per Page. Please make sure the data file is in 1024 bytes per Page format.This device is set to 1056 bytes per Page by default at the factory.A confirmation dialog will be displayed if 1056 bytes per Page device is detected.If accepted the configuration register of the device will be programmed to 1024 byes per Page permanently.Otherwise the executed operation will be aborted.A seperate 1056 byte page device selection is available for the 1056 bytes per Page device with 1056 bytesper Page format data file.***1024 and 1056 devices should not be mixed when running a job in Concurrent mode.***Erase before programming must be enabled if the state of the deviceis uncertain.Sector LockDown can be set in Device Configure. Once a sector is locked down Erase and Program will fail.The sector then cannot be unlocked.Security register is currently not supported for the 1024 byte page size.