Atmel AT89C5130A-RDTIM QFP(64) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASMR64QPT, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.) | FASMR64QPT, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.) |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64TQA, FSM64PQTF, FSM64PQTX, FSM64PQT, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.) | FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64TQA, FSM64PQTF, FSM64PQTX, FSM64PQT, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.), FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64TQA, FSM64PQTF, FSM64PQT, FSM64PQTX, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64PQTF, FASM64PQT, FASM64PQTX, FASM64PQTA, LASMR64QPT (repl.) | LASMR64QPT |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64TQA, FSM64PQTF, FSM64PQTX, FSM64PQT, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.) | FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64TQA, FSM64PQTF, FSM64PQTX, FSM64PQT, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: In the Buffer 16KB User Memory is mapped to [0000h-3FFFh]1KB Data Memory (EEPROM) is mapped to [F000h-F3FFh] and3KB Boot Memory is mapped to [F400h-FFFFh].Part can be secured by programming bits 0 through 2 of HSB.Bit 0 (LB0): Parallel programming is disabled;Bit 1 (LB1): Parallel program/verify are disabled;Bit 2 (LB2): Parallel program/verify/external execution are disabled.Bit 3 of HSB is reserved bits. Bit 4 5 6 and 7 of HSBare set under Device Configure (OSCON0 OSCON1 X2 and BLJ).Check electronic identifiers must be enabled to make the manufacture codeand device ID be copied into XAF.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | QFP(64) |
| Part Number | AT89C5130A-RDTIM |
| Set programming | Yes |
| Package | |
| 8-bit Bytes | |
| ByteWidth | AT89C5130A-RDTIM (ID=D7h) |
| VppProgram | 65536 |
| ElectricalErase | 5 |