Atmel AT89C51CC03CA-RLTUM QFP(44) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM44TQE, FASM44TQF, FASM44TQY, FASM44TQ, FASM44TQN, FASM44TQS, FASM44TQD, FASM44TQA | FASM44TQE, FASM44TQF, FASM44TQY, FASM44TQ, FASM44TQN, FASM44TQS, FASM44TQD, FASM44TQA |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM44TQE, FSM44TQF, FSM44TQY, FSM44TQN, FSM44TQ, FSM44QI, FSM44QC, FSM44TQS, FSM44TQD, FSM44TQA, FASM44TQE, FASM44TQF, FASM44TQY, FASM44TQ, FASM44TQN, FASM44TQS, FASM44TQD, FASM44TQA | FSM44TQE, FSM44TQF, FSM44TQY, FSM44TQN, FSM44TQ, FSM44QI, FSM44QC, FSM44TQS, FSM44TQD, FSM44TQA, FASM44TQE, FASM44TQF, FASM44TQY, FASM44TQ, FASM44TQN, FASM44TQS, FASM44TQD, FASM44TQA, FSM44TQE, FSM44TQF, FSM44TQY, FSM44TQN, FSM44TQ, FSM44TQS, FSM44QI, FSM44QC, FSM44TQD, FSM44TQA, FASM44TQE, FASM44TQF, FASM44TQY, FASM44TQ, FASM44TQN, FASM44TQS, FASM44TQD, FASM44TQA |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM44TQE, FSM44TQF, FSM44TQY, FSM44TQN, FSM44TQ, FSM44QI, FSM44QC, FSM44TQS, FSM44TQD, FSM44TQA, FASM44TQE, FASM44TQF, FASM44TQY, FASM44TQ, FASM44TQN, FASM44TQS, FASM44TQD, FASM44TQA | FSM44TQE, FSM44TQF, FSM44TQY, FSM44TQN, FSM44TQ, FSM44QI, FSM44QC, FSM44TQS, FSM44TQD, FSM44TQA, FASM44TQE, FASM44TQF, FASM44TQY, FASM44TQ, FASM44TQN, FASM44TQS, FASM44TQD, FASM44TQA |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with Flash.In the Buffer 64KB User Memory is mapped into 0000h-FFFFh2KB Data Memory (EEPROM) is mapped into 10000h-107FFh and2KB Boot Memory is mapped into 10800h-10FFFh.The Data Memory and Boot Memory are treated as a single block.Each block can be ERASED/PROGRAMMED separately by setting Ranges under Device/Options.The following range setting corresponds to each block: 00000h-0FFFFh (Flash Memory)10000h-10FFFh (Data Memory and Boot Memory)Part can be secured by programming Lock bits 0 through 2 of HSB using Secure command.Bit 0 (LB0): Parallel programming is disabled.Bit 1 (LB1): Parallel program/verify are disabled.Bit 2 (LB2): Parallel program/verify/external execution are disabled.Bits 3 4 5 of HSB are reserved bits. Bits 6 7 of HSB are set under DeviceConfigure (X2 & BLJ).DeviceConfigure has the XAF parameters necessary when programming a CAN bootloader into Boot memory area.Check electronic identifiers (ID)’ must be ENABLED under Device/Options. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | QFP(44) |
| Part Number | AT89C51CC03CA-RLTUM |
| Package | |
| 8-bit Bytes | |
| ByteWidth | AT89C51CC03CA-RLTUM (ID=FFFEh) |
| VppProgram | 69632 |
| ElectricalErase | 5 |