Atmel AT89C51ED2-SMUIM PLCC(68) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM68PE, FASM68PC, FASM68P, FASM68PM | FASM68PE, FASM68PC, FASM68P, FASM68PM |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM68PB, FSM68PE, FSM68PC, FSM68PMA, FSM68P, FSM68PA, FSM84UP, FASM68PE, FASM68PC, FASM68P, FASM68PM, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM68PB, FSM68PE, FSM68PC, FSM68PMA, FSM68P, FSM68PA, FSM84UP, FASM68PE, FASM68PC, FASM68P, FASM68PM, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.), FSM68PB, FSM68PE, FSM68PC, FSM68PMA, FSM68P, FSM68PA, FSM84UP, FASM68PE, FASM68P, FASM68PC, FASM68PM, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM68PB, FSM68PE, FSM68PC, FSM68PMA, FSM68P, FSM68PA, FSM84UP, FASM68PE, FASM68PC, FASM68P, FASM68PM, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM68PB, FSM68PE, FSM68PC, FSM68PMA, FSM68P, FSM68PA, FSM84UP, FASM68PE, FASM68PC, FASM68P, FASM68PM, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with Flash.64KByte User Memory is mapped into 0000h-FFFFh2KB Data Memory (EEPROM) is mapped into 10000h-107FFh.Part can be secured by programming Lock bits 0through 2 of HSB under SECURE options:bit 0 (LB0): Parallel programming is disabled.bit 1 (LB1): Parallel program/verify are disabled.bit 2 (LB2): Parallel program/verify/external execution are disabled.Bit7 6 and 3 of HSB are set under Device Config (X2 BLJB and XRAM).Erasing the device does not clear bits X2 and BLJB. However these bits can be toggled betweenSET and CLEARED by executing a program operation.If the security bits are activated a Chip Erase operation has to be executed before programming the device.XAF content is lost after a chip erase’. XAF content is restored after a program operation.Due to hardware limitations verify voltage can only be as high as 5.2V. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | PLCC(68) |
| Part Number | AT89C51ED2-SMUIM |
| Package | |
| 8-bit Bytes | |
| ByteWidth | AT89C51ED2-SMUIM (ID=D7h) |
| VppProgram | 67584 |
| ElectricalErase | 5 |