Atmel AT90LS2323-4PI DIP(8) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48D300, FASM48D600 | FASM48D300, FASM48D600 |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM32DG, FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.), LX4SM32DG (repl.) | FSM32DG, FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.), LX4SM32DG (repl.), FSM32DG, FSM48D, FSM48DH, FSM48DF, FSM48DC, FASM48D300, FASM48D600, FSM48DB (obs.), LX4SM32DG (repl.) | LX4SM32DG |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM32DG, FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.), LX4SM32DG (repl.) | FSM32DG, FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.), LX4SM32DG (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Buffer address range 0-7FFh is FLASH Program Memory and 800h-87Fh is EEPROM Data Memory.The status of the Fuse bits under Configure menu is not affected by Chip Erase. The device can besecured under Device Options in ‘Secure after programming’ and ‘Secure after verifying.’ There are threesecurity options: DISABLE (Mode 1) WRITE (Mode 2) and READ&WRITE (Mode 3). DISABLE clears the lock bits.WRITE prevents any further programming of the Flash and EEPROM. READ&WRITE is same as WRITEand the device is also protected from read/verify.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | DIP(8) |
| Part Number | AT90LS2323-4PI |
| Package | |
| 8-bit Bytes | |
| ByteWidth | AT90LS2323-4PI (ID=9102h) |
| VppProgram | 2176 |
| ElectricalErase | 5 |