Atmel AT90S1200 SOIC(20) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM20S, FASM20SE, FASM20SB, FASM20SS, FASM20SSA, FASM28S, FASM28SB, FASM28SH, FASM28SE, FASM24SSA, FASM28SS, FASM28SSA, FASM24SS (obs.) | FASM20S, FASM20SE, FASM20SB, FASM20SS, FASM20SSA, FASM28S, FASM28SB, FASM28SH, FASM28SE, FASM24SSA, FASM28SS, FASM28SSA, FASM24SS (obs.) |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM20S, FSM20SE, FSM20SB, FSM20SS, FSM20SSA, FSM28SB, FSM28SH, FSM28SE, FSM24SSA, FSM28SS, FSM28SSA, FASM20S, FASM20SE, FASM20SB, FASM20SS, FASM20SSA, FASM28S, FASM28SB, FASM28SH, FASM28SE, FASM24SSA, FASM28SS, FASM28SSA, FSM30S (obs.), FASM24SS (obs.) | FSM20S, FSM20SE, FSM20SB, FSM20SS, FSM20SSA, FSM28SB, FSM28SH, FSM28SE, FSM24SSA, FSM28SS, FSM28SSA, FASM20S, FASM20SE, FASM20SB, FASM20SS, FASM20SSA, FASM28S, FASM28SB, FASM28SH, FASM28SE, FASM24SSA, FASM28SS, FASM28SSA, FSM30S (obs.), FASM24SS (obs.), FSM20S, FSM20SE, FSM20SB, FSM20SS, FSM20SSA, FSM28SE, FSM28SB, FSM28SH, FSM24SSA, FSM28SS, FSM28SSA, FASM20S, FASM20SE, FASM20SB, FASM20SS, FASM20SSA, FASM28S, FASM28SE, FASM28SB, FASM28SH, FASM24SSA, FASM28SS, FASM28SSA, FSM30S (obs.), FASM24SS (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM20S, FSM20SE, FSM20SB, FSM20SS, FSM20SSA, FSM28SB, FSM28SH, FSM28SE, FSM24SSA, FSM28SS, FSM28SSA, FASM20S, FASM20SE, FASM20SB, FASM20SS, FASM20SSA, FASM28S, FASM28SB, FASM28SH, FASM28SE, FASM24SSA, FASM28SS, FASM28SSA, FSM30S (obs.), FASM24SS (obs.) | FSM20S, FSM20SE, FSM20SB, FSM20SS, FSM20SSA, FSM28SB, FSM28SH, FSM28SE, FSM24SSA, FSM28SS, FSM28SSA, FASM20S, FASM20SE, FASM20SB, FASM20SS, FASM20SSA, FASM28S, FASM28SB, FASM28SH, FASM28SE, FASM24SSA, FASM28SS, FASM28SSA, FSM30S (obs.), FASM24SS (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Buffer address range 0-3FFh is FLASH Program Memory and 400h-43Fh is EEPROM Data Memory.The device has two lock bits.If LB1 is set further programming of memory without first erasing the device is disabled.If LB1&LB2 is set verify of memory is also disabled.Erasing the device erases the Flash Program Memory the EEPROM Data Memory and clears all lockbits.Erasing the device will not change the state of the Fuse bits. These can be changed by reprogramming the device.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | DIP(20) SOIC(20) |
| Part Number | AT90S1200 |
| Package | |
| 8-bit Bytes | |
| ByteWidth | AT90S1200 (ID=9001h) |
| VppProgram | 1088 |
| ElectricalErase | 5 |