Atmel AT91SAM7S128D-AU QFP(64) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM64PQTNA | FASM64PQTNA |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM64PQTNA, FASM64PQTNA, WASM64PQTNA (repl.) | FSM64PQTNA, FASM64PQTNA, WASM64PQTNA (repl.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM64PQTNA, FASM64PQTNA, WASM64PQTNA (repl.) | FSM64PQTNA, FASM64PQTNA, WASM64PQTNA (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | SAM7S128 Arm-based Flash MCU |
| Device Size: | 128 KBytes Flash32Kbytes SRAM |
| Algorithm Programming method: | Fast Flash Programming Interface |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Word Address(hex) |
| Main Flash Area | R/W/E | Yes | 0000_0000h -0001_FFFFh | 0000_0000h -0000_FFFFh |
* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Considerations:
| 1. The secure operation will program the lock bits and enables the protection mode. | Once Secureonly an erase operation can unsecure the part. | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 3.3 |
| Packages | QFP(64) |
| Part Number | AT91SAM7S128D-AU |
| Set programming | Yes |
| Package | |
| Bytes | 0h-FFFFh |
| ByteWidth | AT91SAM7S128D-AU |
| VppProgram | 65536 |
| ElectricalErase | 3.3 |