Atmel ATMEGA163-8AI QFP(44) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM44TQE, FASM44TQF, FASM44TQY, FASM44TQ, FASM44TQN, FASM44TQS, FASM44TQD, FASM44TQA | FASM44TQE, FASM44TQF, FASM44TQY, FASM44TQ, FASM44TQN, FASM44TQS, FASM44TQD, FASM44TQA |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM44TQE, FSM44TQF, FSM44TQY, FSM44TQN, FSM44TQ, FSM44QI, FSM44QC, FSM44TQS, FSM44TQD, FSM44TQA, FASM44TQE, FASM44TQF, FASM44TQY, FASM44TQ, FASM44TQN, FASM44TQS, FASM44TQD, FASM44TQA | FSM44TQE, FSM44TQF, FSM44TQY, FSM44TQN, FSM44TQ, FSM44QI, FSM44QC, FSM44TQS, FSM44TQD, FSM44TQA, FASM44TQE, FASM44TQF, FASM44TQY, FASM44TQ, FASM44TQN, FASM44TQS, FASM44TQD, FASM44TQA, FSM44TQE, FSM44TQF, FSM44TQY, FSM44TQN, FSM44TQ, FSM44TQS, FSM44QI, FSM44QC, FSM44TQD, FSM44TQA, FASM44TQE, FASM44TQF, FASM44TQY, FASM44TQ, FASM44TQN, FASM44TQS, FASM44TQD, FASM44TQA |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM44TQE, FSM44TQF, FSM44TQY, FSM44TQN, FSM44TQ, FSM44QI, FSM44QC, FSM44TQS, FSM44TQD, FSM44TQA, FASM44TQE, FASM44TQF, FASM44TQY, FASM44TQ, FASM44TQN, FASM44TQS, FASM44TQD, FASM44TQA | FSM44TQE, FSM44TQF, FSM44TQY, FSM44TQN, FSM44TQ, FSM44QI, FSM44QC, FSM44TQS, FSM44TQD, FSM44TQA, FASM44TQE, FASM44TQF, FASM44TQY, FASM44TQ, FASM44TQN, FASM44TQS, FASM44TQD, FASM44TQA |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Buffer address range 0000h-3FFFh is FLASH Program Memory and 4000h-41FFhis EEPROM Data Memory.The Calibration Byte can be programmed into any address(from 0000h to 3FFFh) in the Flash memory OR EEPROM(from 4000h to 41FFh).To make use of Calibration Byte set Device/Configure/CALIBRATION to ENABLE then setDevice/Configure/CAL BYTE ADDRESS to 0h to select address 0 in the signature row high bytefor 1.0MHz internal RC Oscillator Calibrationthen set address under Device/Configure/CALIBRATION ADDRESS.You also can set the fuse from Fuse Low Byte and Fuse High Byteunder Device/Configure menu. The fuses are mapped into the fuse bytes in the followingway. Fuse Low Byte: [Bit0:CKSEL0 Bit1:CKSEL1 Bit2:CKSEL2 Bit3:CKSEL3 Bit4:RESERVED Bit5:SPIENBit6:BODEN Bit7:BODLEVEL]; Fuse High Byte: [Bit0:BOOTRST Bit1:BOOTSZ0 Bit2:BOOTSZ1Bit3 to Bit7 are RESERVED]. All the RESERVED bits must be set to 1′ otherwise it will failverify or compare. Please refer to the device specifications for detailed information. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | QFP(44) |
| Part Number | ATMEGA163-8AI |
| 8-bit Bytes | |
| Package | |
| ByteWidth | ATMEGA163-8AI (ID=9402h) |
| VppProgram | 16896 |
| ElectricalErase | 5 |