+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Atmel ATmega168A-MU LAP(32) Device

Adapters for Automated Programmers

6th Gen 7th Gen
FASMR32MLFKE, FASM32MLFA, FASMR32MLFA, FASMR32MLFR FASMR32MLFKE, FASM32MLFA, FASMR32MLFA, FASMR32MLFR

Adapters for Manual Programmers

6th Gen 7th Gen 9th Gen
FSMR32MLFKE, FSM32MLF, FASMR32MLFKE, FASM32MLFA, FSMR32MLFA, FSMR32MLFR, FASMR32MLFA, FASMR32MLFR, LX4ASMR32MLFR (repl.), WASMR32MLFA (repl.), LASMR32MLFKE (repl.) FSMR32MLFKE, FSM32MLF, FASMR32MLFKE, FASM32MLFA, FSMR32MLFA, FSMR32MLFR, FASMR32MLFA, FASMR32MLFR, LX4ASMR32MLFR (repl.), WASMR32MLFA (repl.), LASMR32MLFKE (repl.) LX4ASMR32MLFR, WASMR32MLFA, LASMR32MLFKE

Adapters for Engineering Programmers

6th Gen 7th Gen
FSMR32MLFKE, FSM32MLF, FASMR32MLFKE, FASM32MLFA, FSMR32MLFA, FSMR32MLFR, FASMR32MLFA, FASMR32MLFR, LX4ASMR32MLFR (repl.), WASMR32MLFA (repl.), LASMR32MLFKE (repl.) FSMR32MLFKE, FSM32MLF, FASMR32MLFKE, FASM32MLFA, FSMR32MLFA, FSMR32MLFR, FASMR32MLFA, FASMR32MLFR, LX4ASMR32MLFR (repl.), WASMR32MLFA (repl.), LASMR32MLFKE (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT: In the Buffer address [0000h-3FFFh] is for FLASH Program Memory and address [4000h-41FFh]is for EEPROM Data Memory. There is one Calibration Byte residing in the signature rowhigh byte of address 0h for 8.0MHz internal RC Oscillator calibration.To program this calibration byte into the memory in Device > Configure1)Set CALIBRATION to ENABLE2)Set CAL BYTE ADDRESS to Calibration Byte address 00h.3)Set CALIBRATION ADDRESS to the memory address [0000h-41FFh] you want to program the Calibration Byte.New devices may automatically calibrate the RC Oscillator.Please set the CALIBRATION option to DISABLE(default) to use automatic calibration.COMPARE operation will only verify data read from the deviceagainst data in the Buffer. The Calibration byte will be ignored during compare regardlessof the Calibration settings in Device > Configure.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

Manufacturer

Atmel

Vcc(program)

5

Packages

LAP(32)

Part Number

ATmega168A-MU

8-bit Bytes
Package
ByteWidth

ATmega168A-MU (ID=9406h)

VppProgram

16896

ElectricalErase

5