Atmel ATMEGA16HVA-4CKU LGA(36) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVE4ASMC36LGAB, FVE4ASMC36LGAB | LX4ASMC36LGAB, FVE4ASMC36LGAB |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVE4ASMC36LGAB, FVE4ASMC36LGAB | LX4ASMC36LGAB, FVE4ASMC36LGAB |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: FLASH Program Memory is mapped to buffer location [0000h-3FFFh]. EEPROM Data Memory is mapped to buffer location [4000h-41FFh].You may set the Fuse Low Byte and Fuse High Byte by selecting Device Config > Config. The fuses are mapped into the fuse bytes in the following way. Fuse Low Byte: [SUT0; Bit1:SUT1; Bit2:SUT2; Bit3:SELFPRGEN; Bit4:DWEN; Bit5:SPIEN; Bit6:EESAVE; Bit7:WDTON] Fuse High Byte: [OSCSEL0; Bit1:OSCSEL1; Bits 2:7:–]Please refer to the device specifications for detailed information.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 3.3 |
| Packages | LGA(36) |
| Part Number | ATMEGA16HVA-4CKU |
| Set programming | Yes |
| 8-bit Bytes | |
| Package | |
| Bytes | 0h-3FFFh; 4000h-40FFh |
| ByteWidth | ATMEGA16HVA-4CKU (ID=940Ch) |
| VppProgram | 16640 |
| ElectricalErase | 3.3 |