Atmel ATmega2561-16AU QFP(64) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM64PQAB | FX2ASM64PQAB, FASM64PQAB |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM64PQAB, FASM64PQAB | FX2SM64PQAB, FSM64PQAB, FX2ASM64PQAB, FASM64PQAB, LX2ASM64PQAB (repl.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM64PQAB, FASM64PQAB | FX2SM64PQAB, FSM64PQAB, FX2ASM64PQAB, FASM64PQAB, LX2ASM64PQAB (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: In the Data Pattern addresses [0000h-3FFFFh] are for Flash Memory and addresses [40000h-40FFFh] are for EEPROM Data Memory. There is one Calibration Byte residing in the signature row high byte of address 0h for 8.0MHz internal RC Oscillator calibration. To program this Calibration Byte into the memory under Device > Configure 1)Set CALIBRATION to ENABLE 2)Set CAL BYTE ADDRESS to Calibration Byte address 00h. 3)Set CALIBRATION ADDRESS to the memory address [00000h-40FFFh] you want to program the Calibration Byte to. New devices may automatically calibrate the RC Oscillator. Please set the CALIBRATION option to DISABLE(default) to use automatic calibration. COMPARE operation will only verify data read from the device against data in the Data Pattern. The Calibration Byte will be ignored during compare regardless of the Calibration settings under Device > Configure. Secure and unsecure batches of devices cannot be mixed in gang mode.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | QFP(64) |
| Part Number | ATmega2561-16AU |
| 8-bit Bytes | |
| Package | |
| Bytes | 0h-3 FFFFh; 4 0000h-4 0FFFh |
| ByteWidth | ATmega2561-16AU (ID=9802h) |
| VppProgram | 266240 |
| ElectricalErase | 5 |