Atmel ATmega32-16AUR QFP(44) Device

Adapters for Automated Programmers

8th Gen

FVE4ASMR44TQFQ, FVE4ASMR44TQFQ

Adapters for Manual Programmers

8th Gen

FVE4ASMR44TQFQ, FVE4ASMR44TQFQ

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT: Algorithm support for this device selection is developed. Device samples are needed for QA testing and full release in BPWin.For information on how to obtain an expedited release of this device support please contact BPM Microsystems at:Inside Sales713–688-4600inside_sales@bpmmicro.comInformation on expected socket module support can be found our web page at: http://www.www.bpmmicro.com/find-your-device/**Please note that receipt of device samples and QA testing must be completed before socket module support can be validated.

Device Type:	8-bit Microcontroller
Device Size:	32k Bytes In-system Programmable Flash

Memory Organization:

Memory Type	*Attributes^()**	Included in default Range (Y/N)	DUT Physical Byte Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
Main Flash Area	R/W/E	Yes	0000_0000 – 0000_7FFF	0000_0000 – 0000_7FFF
EEPROM Data Memory	R/W/E	No	0000_8000-0000_83FF	0000_8000-0000_83FF

Default Algorithm Range	—	—	0000_0000 – 0000_83FF	0000_0000 – 0000_83FF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

In the Data Pattern addresses [0000h-7FFFh] are for Flash Memory and addresses [8000h-83FFh] are for EEPROM Data Memory. There is four Calibration Bytes residing in the signature row high byte of addresses 0h 1h 2h and 3h for 1.0MHz 2.0MHz 4.0MHz and 8.0MHz internal RC Oscillator calibration. To program one of these four Calibration Bytes into the memory under Device > Configure 1)Set CALIBRATION to ENABLE 2)Set CAL BYTE ADDRESS to one of the four Calibration Byte addresses (00h-03h). 3)Set CALIBRATION ADDRESS to the memory address [00000h-83FFh] you want to program the Calibration Byte to. New devices may automatically calibrate the RC Oscillator. Please set the CALIBRATION option to DISABLE(default) to use automatic calibration.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	Atmel
Packages	QFP(44)
Part Number	ATmega32-16AUR
Vcc(program)	5
8-bit Bytes
Package