Atmel ATMEGA32C1-15AD QFP(32) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR32QFPA, FASM32TQI | FX4ASMR32QFPA, FASMR32QFPA, FASM32TQI, LX4ASMR32QFPA (repl.) | LX4ASMR32QFPA |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR32QFPA, FSM32TQI, FASMR32QFPA, FASM32TQI | FX4SMR32QFPA, FSMR32QFPA, FSM32TQI, FX4ASMR32QFPA, FASMR32QFPA, FASM32TQI, LX4ASMR32QFPA (repl.) | LX4ASMR32QFPA |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR32QFPA, FSM32TQI, FASMR32QFPA, FASM32TQI | FX4SMR32QFPA, FSMR32QFPA, FSM32TQI, FX4ASMR32QFPA, FASMR32QFPA, FASM32TQI, LX4ASMR32QFPA (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Data Pattern address range 0000h-7FFFh is FLASH Program Memory and 8000h-83FFhis EEPROM Data Memory.You can set the fuse from Fuse Low Byte and Fuse High Byteunder Device Configure menu. The fuses are mapped into the fuse bytes in the following way: Fuse Low Byte: [Bit0:CKSEL0 Bit1:CKSEL1 Bit2:CKSEL2 Bit3:CKSEL3 Bit4:SUT0 Bit5:SUT1 Bit6:CKOUT Bit7:CKDIV8]; Fuse High Byte: [Bit0:BOOTRST Bit1:BOOTSZ0 Bit2:BOOTSZ1 Bit3: EESAVE Bit4:WDTON Bit5:SPIEN Bit6:DWEN Bit7:RSTDISBL].Extended Fuse Byte: [Bit0:BODLEVEL0; Bit1:BODLEVEL1; Bit2:BODLEVEL2; Bit3:PSCRVB; Bit4:PSCRVA: Bit5:PSCRB];Please refer to the device specifications for detailed information.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | QFP(32) |
| Part Number | ATMEGA32C1-15AD |
| 8-bit Bytes | |
| Package | |
| Bytes | 0h-7FFFh; 8000h-83FFh |
| ByteWidth | ATMEGA32C1-15AD (ID=9586h) |
| VppProgram | 33792 |
| ElectricalErase | 5 |