Atmel ATmega48V-P DIP(28) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48D300, FASM48D600 | FASM48D300, FASM48D600 |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: In the Buffer address [0000h-0FFFh] is for FLASH Program Memory and address [1000h-10FFh] is for EEPROM Data Memory.There is one Calibration Byte residing in the signature row high byte ofaddress 0h for 8.0MHz internal RC Oscillator calibration.To program this calibration byte into the memory in Device Configure1)Set CALIBRATION to ENABLE2)Set CAL BYTE ADDRESS to Calibration Byte address 00h.3)Set CALIBRATION ADDRESS to the memory address [0000h-10FFh] you want to program the Calibration Byte.New devices may automatically calibrate the RC Oscillator.Please set the CALIBRATION option to DISABLE(default) to use automatic calibration.COMPARE operation will only verify data read from the device against data in the Buffer.The Calibration byte will be ignored during compare regardless of the Calibration settings inDevice Configure.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | DIP(28) |
| Part Number | ATmega48V-P |
| 8-bit Bytes | |
| Package | |
| ByteWidth | ATmega48V-P (ID=9205h) |
| VppProgram | 4352 |
| ElectricalErase | 5 |