+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Atmel ATmega645V-AI QFP(64) Device

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT: In the buffer address [0000h-FFFFh] is for Flash Memory and [10000h-107FFh] is for EEPROM Data Memory.The Calibration Byte can be programmed into any address of Flash Memory and EEPROM memory.To make use of Calibration Byte under Device Configure set CALIBRATION to ENABLE then setCAL BYTE ADDRESS to set address 0h in the signature row high bytefor 8.0MHz internal RC Oscillator Calibrationthen set CALIBRATION ADDRESS (any address within [0000h-107FFh]).New devices may automatically calibrate the RC Oscillator.Please set the CALIBRATION option to DISABLE(default) to use automatic calibration.You also can set the Fuse Bytes under Device Configure menu.For all Fuse bits 1 is unprogrammed 0 is programmed.For the details of each Fuse Byte please refer to the device specifications.A secured device must be erased before reprogrammed.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

Manufacturer

Atmel

Vcc(program)

5

Packages

QFP(64)

Part Number

ATmega645V-AI

8-bit Bytes
Package
ByteWidth

ATmega645V-AI (ID=9605h)

VppProgram

67584

ElectricalErase

5