Atmel ATmega649-MJ MLF(64) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM64MLFA | FASM64MLFA |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM64MLFA, FASM64MLFA, WASM64MLFA (repl.) | FSM64MLFA, FASM64MLFA, WASM64MLFA (repl.) | WASM64MLFA |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM64MLFA, FASM64MLFA, WASM64MLFA (repl.) | FSM64MLFA, FASM64MLFA, WASM64MLFA (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: In the buffer address [00000h-0FFFFh] is for Flash Memory and [10000h-107FFh] is for EEPROM Data Memory.The Calibration Byte can be programmed into any address of Flash Memory and EEPROM memory.To make use of Calibration Byte under Device Configure set CALIBRATION to ENABLE then setCAL BYTE ADDRESS to set address 0h in the signature row high bytefor 8.0MHz internal RC Oscillator Calibrationthen set CALIBRATION ADDRESS (any address within [00000h-107FFh]).New devices may automatically calibrate the RC Oscillator.Please set the CALIBRATION option to DISABLE(default) to use automatic calibration.You also can set the Fuse Bytes under Device Configure menu.For all Fuse bits 1 is unprogrammed 0 is programmed.For the details of each Fuse Byte please refer to the device specifications.A secured device must be erased before reprogrammed.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | MLF(64) |
| Part Number | ATmega649-MJ |
| 8-bit Bytes | |
| Package | |
| ByteWidth | ATmega649-MJ (ID=9603h) |
| VppProgram | 67584 |
| ElectricalErase | 5 |