Atmel ATSAM4SD32BA-MU LAP(64) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FXASMR64QFN, FASMR64QFN | FX4ASMR64QFN, FXASMR64QFN, FASMR64QFN, LX4ASM64QFN (repl.) | LX4ASM64QFN |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FXSMR64QFN, FSMR64QFN, FXASMR64QFN, FASMR64QFN | FX4SMR64QFN, FXSMR64QFN, FSMR64QFN, FX4ASMR64QFN, FXASMR64QFN, FASMR64QFN, LX4ASM64QFN (repl.) | LX4ASM64QFN |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FXSMR64QFN, FSMR64QFN, FXASMR64QFN, FASMR64QFN | FX4SMR64QFN, FXSMR64QFN, FSMR64QFN, FX4ASMR64QFN, FXASMR64QFN, FASMR64QFN, LX4ASM64QFN (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: ATSAM4S ARM Thumb-based Microcontroller with 2*1024 Kbytes Flash Memory.Flash Bank 0 (Device address 400000h-4FFFFFh) is mapped to Data Pattern: 000000h-0FFFFFhFlash Bank 1 (Device address 500000h-5FFFFFh) is mapped to Data Pattern: 100000h-1FFFFFh GP NVM Bit 0 and the SSE Command secure command can be programmed by setting the appropriate Device > Secure settings. Once Secured only an erase operation can unsecure the part. GP NVM Bit 1 and GP NVM Bit 2 can be set in Device > Configure. Once GP NVM Bit 2 is set Flash Bank 1 will be mapped to location 400000h.Please refer to the datasheet for more detail.Lock bits are currently not supported. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 3.3 |
| Packages | LAP(64) |
| Part Number | ATSAM4SD32BA-MU |
| Set programming | Yes |
| Package | |
| Bytes | 0h-7 FFFFh; 8 0000h-F FFFFh |
| ByteWidth | ATSAM4SD32BA-MU |
| VppProgram | 1048576 |
| ElectricalErase | 3.3 |