Atmel ATSAMD20J18A-AU QFP(64) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR64TQFP | FX4ASMR64TQFP, FASMR64TQFP, LX4ASMR64TQFP (repl.) | FVE4ASMR64TQFP |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR64TQFP | FX4ASMR64TQFP, FASMR64TQFP, LX4ASMR64TQFP (repl.) | FVE4ASMR64TQFP |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FASMR64TQFP | FX4ASMR64TQFP, FASMR64TQFP, LX4ASMR64TQFP (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | ARM-based 32-bit MCU with Flash. |
| Device Size: | 256K-Byte Flash |
| Algorithm Programming Method: | SWD protocol. |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Embedded Flash Memory | R/W/E | Yes | 0000_0000 – 0003_FFFF | 0000_0000 – 0003_FFFF |
| Default Algorithm Range | R/W/E | Yes | 0000_0000 – 0003_FFFF | 0000_0000 – 0003_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.
Special Device Considerations: The Erase operation performs a Chip Erase which will erase the entire flash contents. Lock Bits & Secure Bit (SSB) are supported in this algorithm. Setting a lock bit to 0 will prevent any programming to the corresponding region without first erasing the device. Enable Secure to set the security bit but ID must be disabled afterwards to execute Erase operation. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 262144 |
|---|---|
| Manufacturer | Atmel |
| Packages | QFP(64) |
| Part Number | ATSAMD20J18A-AU |
| Set programming | Yes |
| Vcc(program) | 3.3 |