Atmel ATSAME70Q21B-AN QFP(144) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVE2ASMR144QFPE, FVE2ASMR144QFPE | FVE2ASMR144QFPE |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVE2ASMR144QFPE, FVE2ASMR144QFPE | FVE2ASMR144QFPE |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: This algorithm uses the FFPI programming method.
| Device Type: | SAM E70 Series Flash Microcontroller. |
| Device Size: | 2048KByte |
| Algorithm Programming method: | Fast Flash Programming Interface(FFPI). |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Word Address(hex)(if this area is selected/Activated) | BPWin Buffer Word Address(hex) |
| Main Flash Area | R/W/E | Yes | 40_0000h – 4F_FFFFh | 00_0000h – 0F_FFFFh |
* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| 1. | GP NVM Bit 0 and the SSE secure command can be programmed by enabling ‘Secure(SSE Command) operation’. Once Secured only an erase operation can unsecure the part. | |
| 2. | Lock bits can be set under Device–>Setting | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Packages | QFP(144) |
| Part Number | ATSAME70Q21B-AN |
| Set programming | Yes |
| Vcc(program) | 3.3 |