Atmel ATtiny13-MMU QFN(10) Device
Adapters for Automated Programmers
| 8th Gen |
| FVE4ASMR10QFNAB, FVE4ASMR10QFNAB |
Adapters for Manual Programmers
| 8th Gen |
| FVE4ASMR10QFNAB, FVE4ASMR10QFNAB |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | 8 bit AVR Microcontroller |
| Device Size: | 1K Byte of Flash + 64 Byte of EEPROM |
| Algorithm Programming Method: | Serial |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Main Flash Memory | R/W/E | Yes | 0000_0000 – 0000_03FF | 0000_0000 – 0000_03FF |
| EEPROM | R/W/E | Yes | 0000_0000 – 0000_003F | 0000_0400 – 0000_043F |
| Default Algorithm Range | — | — | 0000_0000 – 0000_043F | 0000_0000 – 0000_043F |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.
| 1. | This device has 2 Fuse Bytes that can be set under Device Configure. Please see the device specification on the details of setting these bytes | |
| 2. | Please set the CALIBRATION option to DISABLE(default) to use automatic calibration. | |
| 3. | Compare operation will only verify data read from the device against data in the Data Pattern regardless of the Calibration settings under Device Configure. | |
| 4. | Programming LB1 in the secure operation write secures the devices. | |
| 5. | Programming LB2 in the secure operation read secures the devices. | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | QFN(10) |
| Part Number | ATtiny13-MMU |
| 8-bit Bytes | |
| Package | |
| Bytes | 0h-43Fh |
| ByteWidth | ATtiny13-MMU (ID=9007h) |
| VppProgram | 1088 |
| ElectricalErase | 5 |