Atmel ATtiny44V-SSU SOIC(14) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM14SA, FASM16SAT, FASM16SA | FASM14SA, FASM16SAT, FASM16SA |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM14SA, FSM16SAT, FSM16SA, FASM14SA, FASM16SAT, FASM16SA | FSM14SA, FSM16SAT, FSM16SA, FASM14SA, FASM16SAT, FASM16SA |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM14SA, FSM16SAT, FSM16SA, FASM14SA, FASM16SAT, FASM16SA | FSM14SA, FSM16SAT, FSM16SA, FASM14SA, FASM16SAT, FASM16SA |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: In the Data Pattern addresses [0000h-0FFFh] are for Flash Memory and [1000h-10FFh]are for EEPROM. Erase will erase both Flash and EEPROM.In Device > Configure if CALIBRATION is set ENABLE the Calibration Byte canbe programmed into any address [0000h-10FFh] in the Flash Memory or EEPROM.The address is set in CALIBRATION ADDRESS option.CAL BYTE ADDRESS option is to set address 0h in the signature row high bytefor 8.0MHz internal RC Oscillator Calibration.New devices may automatically calibrate the RC Oscillator.Please set the CALIBRATION option to DISABLE(default) to use automatic calibration.COMPARE operation will only verify data read from the device against data in the buffer.The Calibration byte location will fail during Compare.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Packages | SOIC(14) |
| Part Number | ATtiny44V-SSU |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |