Atmel T89C5115-SISIM PLCC(28) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM28P | FASM28P |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM28P, FSM28PA, FSM84UP, FASM28P, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM28P, FSM28PA, FSM84UP, FASM28P, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM28P, FSM28PA, FSM84UP, FASM28P, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM28P, FSM28PA, FSM84UP, FASM28P, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with Flash. In the 20KB buffer memory 16KB User Memory is mapped into 0000h – 3FFFh2KB Data Memory (EEPROM) is mapped into 4000h – 47FFh and 2KB Boot Memory is mapped into 4800h – 4FFFh.Part can be secured by programming Lock bits 0 through 2 of HSB under SECURE: bit 0 (LB0): Parallel programming is disabled.bit 1 (LB1): Parallel program/verify are disabled.bit 2 (LB2): Parallel program/verify/external execution are disabled.Bit 3 4 5 of HSB are reserved bits. Bit 6 7 of HSBare set under Device > Configure (X2 & BLJ). Device > Configure Options allow Boot Memory data to be ignored or included for device operations. If ignore is selected Erase operation will reprogram original data after Erase.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Packages | PLCC(28) |
| Part Number | T89C5115-SISIM |
| Set programming | Yes |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |