CYGNAL Integrated Products C8051F226 QFP(48) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48TQN, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD | FASM48TQN, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48TQN, FASM48TQN, FSM48TQF, FSM48TQNA, FSM48TQ, FSM48TQA, FSM48TQD, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD | FSM48TQN, FASM48TQN, FSM48TQF, FSM48TQNA, FSM48TQ, FSM48TQA, FSM48TQD, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48TQN, FASM48TQN, FSM48TQF, FSM48TQNA, FSM48TQ, FSM48TQA, FSM48TQD, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD | FSM48TQN, FASM48TQN, FSM48TQF, FSM48TQNA, FSM48TQ, FSM48TQA, FSM48TQD, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with Flash Program Memory. The Write/Erase Lock Byte(at device address 1DFEh) and Read Lock Byte (at device address 1DFFh)must be set through Device Configure. They are not included in the Buffer.In order to program either Write/Erase Lock Byte or Read Lock Byte please set it to non FFh and enable Secure.The Lock bytes can only be erased by Chip Erase.In the Buffer address [1E00h-1FFFh] are reserved. This area cannot be read erased orprogrammed. Buffer locations [2000h-207Fh] is for the 128-byte scratchpad.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | CYGNAL Integrated Products |
|---|---|
| Packages | QFP(48) |
| Part Number | C8051F226 |
| Set programming | Yes |
| Vcc(program) | 3 |
| 8-bit Bytes | |
| Package |