Adapters for Automated Programmers
8th Gen | 9th Gen |
FVE4ASMR24QNG, FVE4ASMR24QNG | FVE4ASMR24QNG |
Adapters for Manual Programmers
8th Gen | 9th Gen |
FVE4ASMR24QNG, FVE4ASMR24QNG | FVE4ASMR24QNG |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
Device Type: | Microcontroller |
Device Size: | 32 Kbyte |
Algorithm Programming Method: | SWD |
Memory Organization:
Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
[User Flash] | [R/W/E] | [Yes] | [0x0000-0x7FFF] | [0x0000-0x7FFF] |
[User Checksum] | [R/W/E] | [Yes] | [0x90300000-0x90300001] | [0x90300000-0x90300001] |
[Flash protection] | [R/W/E] | [Yes] | [0x90400000-0x9040001F] | [0x90400000-0x9040001F] |
[Device Silicon ID] | [R/W] | [Yes] | [0x90500000-0x9050000B] | [0x90500000-0x9050000B] |
[Chip Level Protection] | [R/W/E] | [Yes] | [0x90600000] | [0x90600000] |
Default Algorithm Range | — | — | [0-0x90600001] | [0-0x90600001] |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.
1. | Serialization Supported: | No |
2. | Device Silicon ID is for read only for the addresses [0x905000020x90500003 and 0x90500005] | |
3. | The address [0x90600001] is ignored. | |
4. | There are four states of Chip Level Protection into which the silicon can be moved:[ VIRGIN(0x00) OPEN(0x01) PROTECTED(0x02) KILL(0x04)]. | |
– VIRGIN(0x00) – This mode is not for custom use. Can not program this value to device. | ||
– OPEN(0x01) – In this mode can access all the needed resources including Erase program and verify flash. | ||
– PROTECTED(0x02) – In this mode access to Flash is disabled. Still allow to Erase and reprogram flash. | ||
– KILL(0x04) – The device can no longer be updated. |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
Manufacturer | Cypress |
---|---|
Packages | LAP(24) |
Part Number | CY7C65211-24LTXI |
Vcc(program) | 3.6 |
8-bit Bytes | |
Package |