Cypress CY8C4247LTQ-L485 QFN(68) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR68QFNR, FVE4ASM68QFNR, FVE4ASMR68QFNR, FVE4ASM68QFNR | FVE4ASMR68QFNR, FVE4ASM68QFNR |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR68QFNR, FVE4ASM68QFNR, FVE4ASMR68QFNR, FVE4ASM68QFNR | FVE4ASMR68QFNR, FVE4ASM68QFNR |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Microcontroller ARM Cortex -M0 |
| Device Size: | 128KB Flash |
| Algorithm Programming Method: | Serial Wire Debug(SWD). |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) | User Flash 128KB. | R/W/E | Yes | 0000 0000 – 0001 FFFF | 0000 0000 – 0001 FFFF | Check sum 2Bytes. | R | Yes | 9030 0000 – 9030 0001 | 9030 0000 – 9030 0001 |
| Flash protection 64 Bytes. | R/W/E | Yes | 9040 0000 – 9040 003F | 9040 0000 – 9040 003F |
| 12 Bytes Metadata. | R | Yes | 9050 0000 – 9050 000B | 9050 0000 – 9050 000B |
| 1 Byte Chip Level Protection. | R/W/E | Yes | 9060 0000 – 9060 0001 | 9060 0000 – 9060 0001 |
| Default Algorithm Range | — | — | 0000 0000 – 9060 0001 | 0000 0000 – 9060 0001 |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation. Special Device Considerations: The address [0x90600000] contains the ‘States of Chip-Level Protection’. * There are four states of Chip Level Protection into which the silicon can be moved:[ VIRGIN(0x00) OPEN(0x01) PROTECTED(0x02) KILL(0x04)]. – VIRGIN(0x00) – This mode is not for custom use. Can not program this value to device. – OPEN(0x01) – In this mode can access all the needed resources including Erase program and verify flash. – PROTECTED(0x02) – In this mode access to Flash is disabled. Still allow to Erase and reprogram flash. Can not read and verify flash. – KILL(0x04) – The device can no longer be updated. The address [0x90600001] is ignored. This algorithm does not support Serialization. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Cypress |
|---|---|
| Packages | QFN(68) |
| Part Number | CY8C4247LTQ-L485 |
| Vcc(program) | 1.8 |
| 8-bit Bytes | |
| Package |