+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Cypress MB96F338USAPMC-GSE1 QFP(144) Device

Adapters for Automated Programmers

9th Gen
LX2ASMR144LQFPQN

Adapters for Manual Programmers

9th Gen
LX2ASMR144LQFPQN

Adapters for Engineering Programmers


Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT:

Device Type: 16-bit Microcontroller
Device Size: Program flash: 512 + 32 kB
Algorithm Programming Method: Parallel Programming

Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
ROM Configuration Block (RCB) R/W/E Yes 1F0000 – 1F7FFF 1F0000 – 1F7FFF
Main Flash Area R/W/E Yes 380000 – 3FFFFF 380000 – 3FFFFF
Default Algorithm Range 1F0000 – 3FFFFF 1F0000 – 3FFFFF

* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation. Special Device Considerations:

1. The ROM/Flash Memory Security Byte (MSBA) is located at 1F0000h. 2. The ROM/Flash Memory Security Unlock Key (MSUKA0-MSUKA15) is located at 1F0002h – 1F0011h. 3. To enable ROM/Flash Memory Security the value 99h must be placed at buffer address 1F0000h. If Flash Memory is not to be protected the value 66h must be placed at buffer address 1F0000h. No other value than 99h or 66h should be written there. 4. Erase will check if the ROM/Flash Memory Security Byte is enabled. If enabled a Chip Erase will be performed and benchmark times will increase.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

Manufacturer

Cypress

Packages

QFP(144)

Part Number

MB96F338USAPMC-GSE1

Set programming

Yes

Vcc(program)

3.3

8-bit Bytes
Package