+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Cypress S25FL064LABNFM011 WSON(8) Device

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT:

Device Type: Flash Memory
Device Size: 64 Mbit
Algorithm Programming method: Standard Single SPI


Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Main Flash Area R/W/E Yes 0000_0000 – 007F_FFFF 0000_0000 – 007F_FFFF
SecSi sector R/W No 0080_0000 – 0080_03FF 0080_0000 – 0080_03FF
Default Algorithm Range 0000_0000 – 007F_FFFF 0000_0000 – 007F_FFFF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

Configuration Register 3 (CR3NV) is not supported in this algorithm. Configuration Register 2 (CR2NV) only supports programming the IO3_Reset and Output Impedance bits.
Erase must be selected if device to be programmed already has QE bit enabled.
There are four 256-Byte Security Registers with OTP locks independent from main memory.
mapped to[800000-8000FF][800100-8001FF][800200-8002FF][800300-8003FF] in the Data Pattern respectively.
Lock bits LB[3:0] are onetime programmable(OTP).

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

Manufacturer

Cypress

Packages

WSON(8)

Part Number

S25FL064LABNFM011

Set programming

Yes

Vcc(program)

3.6

8-bit Bytes
Package