Cypress S34ML08G101BHI00 BGA(63) Device
Adapters for Automated Programmers
| 9th Gen |
| FVE4ASMC63BGPE |
Adapters for Manual Programmers
| 9th Gen |
| FVE4ASMC63BGPE |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Algorithm support for this device selection is developed. Device samples are needed for QA testing and full release in BPWin.For information on how to obtain an expedited release of this device support please contact BPM Microsystems at:Inside Sales713–688-4600inside_sales@bpmmicro.comInformation on expected socket module support can be found our web page at: http://www.www.bpmmicro.com/find-your-device/**Please note that receipt of device samples and QA testing must be completed before socket module support can be validated.
| Device Type: | Serial NAND Flash Memory |
| Device Size: | 8Gbit |
| Algorithm Programming Method: | Parallel |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Main memorey | R/W/E | Yes | 000_0000 – 41FF_FFFF | 000_0000 – 41FF_FFFF |
| Default Algorithm Range | R/W/E | — | 000_0000 – 41FF_FFFF | 000_0000 – 41FF_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| Option | Description | Default | Supported (Y/N)? |
| Enable ECC | If set to Enable the internal ECC will be enabled. | Enabled | Yes |
| 1. | Serialization Supported: | Yes |
| 2. | Total number of blocks: | 8192 |
| 2. | Minimun number of good blocks: | 8034 |
| 3. | Pages per block: | 64 |
| 4. | Page size: | 2KBytes |
| 5. | Spare area size: | 64Bytes |
| 6. | Bad block markers location: | byte 2048 of the first Second and Third page of each block |
| 7. | Default bit error rate tolerance: | 1bits per page |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Cypress |
|---|---|
| Packages | BGA(63) |
| Part Number | S34ML08G101BHI00 |
| Vcc(program) | 3.3 |
| 8-bit Bytes | |
| Package |