Dallas Semiconductor DS1621 DIP(8) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48D300 | FASM48D300 |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM32DG, FSM48D, FSM48DH, FSM48DC, FSM48DF, FSM48DL, FSM48DE, FASM48D300, FSM48DB (obs.), LX4SM32DG (repl.) | FSM32DG, FSM48D, FSM48DH, FSM48DC, FSM48DF, FSM48DL, FSM48DE, FASM48D300, FSM48DB (obs.), LX4SM32DG (repl.), FSM32DG, FSM48D, FSM48DH, FSM48DF, FSM48DC, FSM48DL, FSM48DE, FASM48D300, FSM48DB (obs.), LX4SM32DG (repl.) | LX4SM32DG |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM32DG, FSM48D, FSM48DH, FSM48DC, FSM48DF, FSM48DL, FSM48DE, FASM48D300, FSM48DB (obs.), LX4SM32DG (repl.) | FSM32DG, FSM48D, FSM48DH, FSM48DC, FSM48DF, FSM48DL, FSM48DE, FASM48D300, FSM48DB (obs.), LX4SM32DG (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: This device accesses 7 bytes in the following order: TH (high thenlow bytes) TL (high then low bytes) configuration byte and thelast temperature conversion result (high then low bytes read only).Mask for valid data:<0>(TH_high)[XXXXXXXX]<1>(TH_low)[X0000000]<2>(TL_high)[XXXXXXXX]<3>(TL_low)[X0000000]<4>(Config)[000010PS]<5>(Temp_high)[RRRRRRRR]<6>(Temp_low)[R0000000]NOTES: X = data bit that can be configured.P(POL) = Output Polarity Bit. S(1SHOT) = One Shot Mode.R = Read Only Bit.Address 5 and 6 of device are read only and will not compare/verifywith the data in the Buffer. To make the compare pass in address 1 3 and 4the bits with specified value must be set to that value.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Dallas Semiconductor |
|---|---|
| Packages | DIP(8) |
| Part Number | DS1621 |
| Set programming | Yes |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |