Dallas Semiconductor DS5000 (8K) DIP(40) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48D300, FASM48D600 | FASM48D300, FASM48D600 |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.), FSM48D, FSM48DH, FSM48DF, FSM48DC, FASM48D300, FASM48D600, FSM48DB (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
Soft microcontroller with NVRAM. The MCON register isprogrammed using an additional byte at the end of the buffer if and onlyif this byte is something other than 00H; otherwise it gets programmedas 40H. See DS5000 users guide for address mapping. The address youspecify in the MCON register will affect how the part verifies. Thatis it only verifies (reads) below the Data Memory partition. Warning:setting bit 0 (LSB) of the MCON to 1 will secure the part.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Dallas Semiconductor |
|---|---|
| Packages | DIP(40) |
| Part Number | DS5000 |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |