ESMT, Inc. F59L4G81A TSOP(48) Device
Adapters for Automated Programmers
| 9th Gen |
| FVE4ASM48TNL, FVE4ASMR48TN, FVE4ASMR48TNL, FVE4ASM48TN |
Adapters for Manual Programmers
| 9th Gen |
| FVE4ASM48TNL, FVE4ASMR48TN, FVE4ASMR48TNL, FVE4ASM48TN |
Adapters for Engineering Programmers
Last Updated: 03/23/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | NAND Flash Memory |
| Device Size: | 4Gbit |
| Algorithm Programming Method: | Parallel |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Main memorey | R/W/E | Yes | 00000000-20FFFFFF | 00000000-20FFFFFF |
| Default Algorithm Range | R/W/E | — | 00000000-20FFFFFF | 00000000-20FFFFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific” in the menu item Device-> Settings will be written to the DUT during “Program” operation regardless of memory range selection. Special Device Considerations:
| 1. | Serialization Supported: | Yes |
| 2. | Total number of blocks: | 4096 |
| 2. | Minimun number of good blocks: | 4016 |
| 3. | Pages per block: | 64 |
| 4. | Page size: | 2 KBytes |
| 5. | Spare area size: | 64 Bytes |
| 6. | Bad block markers location : | Byte 2048 of the first and second page of each block |
| 7. | Default bit error rate tolerance : | 4 bits per page |
“
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 553648128 |
|---|---|
| Manufacturer | ESMT, Inc. |
| Packages | TSOP(48) |
| Part Number | F59L4G81A |
| Vcc(program) | 3.3 |