Freescale Semiconductor DSP56F803BU80E QFP(100) Device

Adapters for Automated Programmers

6th Gen	7th Gen
FASM100QHE, FASM100QG, FASM100QHF, FASM100QHA	FASM100QHE, FASM100QG, FASM100QHF, FASM100QHA

Adapters for Manual Programmers

6th Gen	7th Gen
FASM100QHE, FSM100QG, FSM100QHE, FSM100QHA, FASM100QG, FASM100QHF, FASM100QHA	FASM100QHE, FSM100QG, FSM100QHE, FSM100QHA, FASM100QG, FASM100QHF, FASM100QHA

Adapters for Engineering Programmers

6th Gen	7th Gen
FASM100QHE, FSM100QG, FSM100QHE, FSM100QHA, FASM100QG, FASM100QHF, FASM100QHA	FASM100QHE, FSM100QG, FSM100QHE, FSM100QHA, FASM100QG, FASM100QHF, FASM100QHA

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT: The device has three different flash blocks: and . Before executing any command please set Device/Configure optionsto select flash blocks for operation.The following is the Buffer memory map. Buffer byte addresses [$0008-$FBFF] map to [$0004-$7DFF]. Buffer byte addresses [$10000-$10FFF] map to [$8000-$87FF]. Buffer byte addresses [$402000-$403FFF] map to [$1000-$1FFF].Other addresses in the Buffer are ignored and should be set to 0.Please set Default buffer value'(Buffer/Options) to 0.Most S-Record files are compiled in Little-Endian format.If so please set ‘Byte order'(Device/Options) to ‘MSB=1LSB=0’. ‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	Freescale Semiconductor
Packages	QFP(100)
Part Number	DSP56F803BU80E
Vcc(program)	3.3
Package