Freescale Semiconductor MC56F8323VFB QFP(64) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: *** Secured and non-secured devices should not be mixed in the same batch while runningin concurrent mode. ***Setting device address 3FF7h(Buffer address 7FEEh-7FEFh) to E70Ah will secure the device.The device has three different flash blocks: and . Before executing any command please set Configure optionsto select flash blocks for operation.The following is the Buffer BYTE memory map.[$0000-$7FFF] mapped to [$0000-$3FFF].[$40000-$41FFF] mapped to [$20000-$20FFF].[$4002000-$4003FFF] mapped to [$1000-$1FFF].Other addresses in the Buffer are ignored and should be set to 0.To program the options in the Device Configure you must select the appropriate optionsAND you must ENABLE Secure. Otherwise none of the options will be programmed.Please set Default buffer value’ to 0.Most S-Record files are compiled in Little-Endian format.If so please set ‘Byte order’ to ‘MSB=1LSB=0’. ‘