Freescale Semiconductor MC68HC705B32MFN PLCC(52) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM52PC, FASM52P, FASM52PI, FASM52PD | FASM52PC, FASM52P, FASM52PI, FASM52PD |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM52PC, FSM52PCA, FSM52P, FSM52PA, FSM52PH, FSM52PMBW, FSM52PI, FSM52PD, FSM84UP, FASM52PC, FASM52P, FASM52PI, FASM52PD, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM52PC, FSM52PCA, FSM52P, FSM52PA, FSM52PH, FSM52PMBW, FSM52PI, FSM52PD, FSM84UP, FASM52PC, FASM52P, FASM52PI, FASM52PD, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM52PC, FSM52PCA, FSM52P, FSM52PA, FSM52PH, FSM52PMBW, FSM52PI, FSM52PD, FSM84UP, FASM52PC, FASM52P, FASM52PI, FASM52PD, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM52PC, FSM52PCA, FSM52P, FSM52PA, FSM52PH, FSM52PMBW, FSM52PI, FSM52PD, FSM84UP, FASM52PC, FASM52P, FASM52PI, FASM52PD, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with EEPROM and EPROM.The following describes the buffer setup:[$0101-$01FF] EEPROM;[$0400-$7DFF] EPROM;[$7FDE] Mask Option Register(MOR);[$7FF0-$7FFF] User Vectors.The address $100 is EEPROM options register(OPTR).The SEC bit of the OPTR can be programmed using the Secure command.It is ignored during normal programming.The blank state of the EPROM is $00.The blank state of the EEPROM is $FF.Other address locations are ignored and should be set to $00.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | PLCC(52) |
| Part Number | MC68HC705B32MFN |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |