Freescale Semiconductor MC68HC705C8ACFN PLCC(44) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASM44P, FASM44PF | FASM44P, FASM44PF | LX4ASMR44PZC |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM44P, FSM44PA, FSM44PF, FSM84UP, FASM44P, FASM44PF, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM44P, FSM44PA, FSM44PF, FSM84UP, FASM44P, FASM44PF, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | LX4ASMR44PZC |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM44P, FSM44PA, FSM44PF, FSM84UP, FASM44P, FASM44PF, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM44P, FSM44PA, FSM44PF, FSM84UP, FASM44P, FASM44PF, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | 8-bit MCU |
| Device Size: | 7744 Bytes |
| Algorithm Programming Method: | Parallel Test Mode. |
Memory Organization:
| Memory Type |
Attributes* |
Included in defaultRange (Y/N) | DUT Physical ByteProgram Address (hex) | DUT Physical ByteRead Address (hex) | BPWin Buffer ByteAddress (hex) |
| EPROM | R/W | Yes | 0000_0000 – 0000_1FFF | 0000_0000 – 0000_1FFF | 0000_0000 – 0000_1FFF | Default Algorithm Range | — | — | 0000_0000 – 0000_1FFF | 0000_0000 – 0000_1FFF | 0000_0000 – 0000_1FFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Special Device Considerations: Microcontroller with EPROM. The window on the chip must be covered before performing any operation on the chip. The following describes the buffer setup: [$0020-$004F] USER PROM 48 BYTES; [$0100-$1EFF] USER PROM 7680 BYTES; [$1FDF] Option Register. [$1FF0-$1FFF] Mask Option Registers & User Vectors PROM. The Option Register (address $1FDF) will always read $02. Address $1FDF should be set to $02 to pass Compare operation. The Security Bit (Bit3 of Option Register) can be set using the DEVICE/SECURE command. The blank state of the EPROM is $00. Other address locations are ignored and should be set to $00. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | PLCC(44) |
| Part Number | MC68HC705C8ACFN |
| Set programming | Yes |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |