Freescale Semiconductor MC68HC705C9ACP DIP(40) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48D300, FASM48D600 | FASM48D300, FASM48D600 |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FASM48D300, FASM48D600, FSM48DB (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FASM48D300, FASM48D600, FSM48DB (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with EPROM. Please check address $3FF1 on the buffer for the right security settings.Bit 7 is security bit and bit 0 is C12A bit.The algorithm will ignore these bits during programming and reading.Only Security settings under Device/Options will program the Security bit and C12A bit.Please refer to device manual for more information on this option.The following describes the buffer setup:[$0020-$004F] and [$0100-$3EFF] USER EPROM; [$3FF0-$3FFF] Mask Option Registers and reset vector.Cover the window for windowed packages.The blank state of the EPROM is $00.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | DIP(40) |
| Part Number | MC68HC705C9ACP |
| Set programming | Yes |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |