Freescale Semiconductor MC68HC705K1 SOIC(16) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM16SB, FASM16S, FASM28S, FASM28SB, FASM28SE, FASM24SSA, FASM20S, FASM20SE, FASM20SB, FASM18S | FASM16SB, FASM16S, FASM28S, FASM28SB, FASM28SE, FASM24SSA, FASM20S, FASM20SE, FASM20SB, FASM18S |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM16SB, FSM28SB, FSM28SE, FSM24SSA, FSM20S, FSM20SE, FSM20SB, FSM18S, FASM16SB, FASM16S, FASM28S, FASM28SB, FASM28SE, FASM24SSA, FASM20S, FASM20SE, FASM20SB, FASM18S, FSM30S (obs.) | FSM16SB, FSM28SB, FSM28SE, FSM24SSA, FSM20S, FSM20SE, FSM20SB, FSM18S, FASM16SB, FASM16S, FASM28S, FASM28SB, FASM28SE, FASM24SSA, FASM20S, FASM20SE, FASM20SB, FASM18S, FSM30S (obs.), FSM16SB, FSM28SE, FSM28SB, FSM24SSA, FSM20S, FSM20SE, FSM20SB, FSM18S, FASM16SB, FASM16S, FASM28S, FASM28SE, FASM28SB, FASM24SSA, FASM20S, FASM20SE, FASM20SB, FASM18S, FSM30S (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM16SB, FSM28SB, FSM28SE, FSM24SSA, FSM20S, FSM20SE, FSM20SB, FSM18S, FASM16SB, FASM16S, FASM28S, FASM28SB, FASM28SE, FASM24SSA, FASM20S, FASM20SE, FASM20SB, FASM18S, FSM30S (obs.) | FSM16SB, FSM28SB, FSM28SE, FSM24SSA, FSM20S, FSM20SE, FSM20SB, FSM18S, FASM16SB, FASM16S, FASM28S, FASM28SB, FASM28SE, FASM24SSA, FASM20S, FASM20SE, FASM20SB, FASM18S, FSM30S (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with EPROM. The following describes the buffer setup:Addresses [$20-$27] are PEPROM. Addresses [$200-$3EF] are EPROM.Addresses [$3F8-$3FF] are user vectors.Mask Option Register (MOR) is at address $17.The MOR byte at address $17 is mapped and linked to the CONFIGURE menu.Each bit links to one CONFIGURE option.Changing the byte at address $17 will affect the CONFIGURE menuand vice versa.The following describes their relationship.Bit 7: Software Pulldown: 0=ENABLED 1=INHIBITED’.Bit 6: ‘Three-pin RC Osc: 0=TWO-PIN 1=THREE-PIN’.Bit 5: ‘RC Oscillator: 0=OTHER 1=RC’.Bit 4: ‘Stop Conversion: 0=STOP 1=WAIT’.Bit 3: ‘Low Voltage Reset: 0=DISABLED 1=ENABLED’.Bit 2: ‘Port A IRQ: 0=DISABLED 1=ENABLED’.Bit 1: ‘Level trigger: 0=DISABLED 1=ENABLED’.Bit 0: ‘COP Watchdog: 0=DISABLED 1=ENABLED’. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | DIP(16) SOIC(16) |
| Part Number | MC68HC705K1 |
| Set programming | Yes |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |