Freescale Semiconductor MC68HC705P6CP DIP(28) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48D300, FASM48D600 | FASM48D300, FASM48D600 |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FASM48D300, FASM48D600, FSM48DB (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FASM48D300, FASM48D600, FSM48DB (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with EPROM. The window on the chip must be covered before performing any operation on the chip. The following describes the buffer setup: Addresses $0020 to $0050 and $0100 to $12FF are EPROM.$1FF0 to $1FFF are user vector. The Mask Option Registers(MOR) is located at $1F00 bit 7 of MOR is unused please set this bit to 0. Please refer to user manual for this option.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | DIP(28) |
| Part Number | MC68HC705P6CP |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |