Freescale Semiconductor MC68HC705SB7 SOIC(28) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM28S, FASM28SB, FASM28SH, FASM28SE | FASM28S, FASM28SB, FASM28SH, FASM28SE |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM28SB, FSM28SH, FSM28SE, FASM28S, FASM28SB, FASM28SH, FASM28SE, FSM30S (obs.) | FSM28SB, FSM28SH, FSM28SE, FASM28S, FASM28SB, FASM28SH, FASM28SE, FSM30S (obs.), FSM28SE, FSM28SB, FSM28SH, FASM28S, FASM28SE, FASM28SB, FASM28SH, FSM30S (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM28SB, FSM28SH, FSM28SE, FASM28S, FASM28SB, FASM28SH, FASM28SE, FSM30S (obs.) | FSM28SB, FSM28SH, FSM28SE, FASM28S, FASM28SB, FASM28SH, FASM28SE, FSM30S (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with EPROM. The window on the chip must be covered before performing any operation on the chip. The following describes the buffer setup: Addresses $0020 to $0028 are PEPROM. The PEPROM set up first byte: bit 0:row 0 and col 0;bit 1:row 1 and col 0;bit 2:row 2 and col 0; and so on.second byte: bit 0:row 0 and col 1;bit 1:row 1 and col 1; and so on. Addresses $0600 to $1DFF are user EPROM. The Mask Option Registers(MOR) is located at $002F. Bit 7 of the MOR at address $002F contains the security bit. This address is set to a default 0x2F from the manufacturer. Please refer to the user’s manual about this option. Addresses $1FF0 to $1FFF are user vectors.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | SOIC(28) |
| Part Number | MC68HC705SB7 |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |