Freescale Semiconductor MC68HC711E20MFU2 QFP(64) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM64PQS, FASM64PQA | FASM64PQS, FASM64PQA |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM64PQS, FSM64PQA, FSM64QM, FSM64Q, FASM64PQS, FASM64PQA | FSM64PQS, FSM64PQA, FSM64QM, FSM64Q, FASM64PQS, FASM64PQA, FSM64PQS, FSM64PQA, FSM64Q, FSM64QM, FASM64PQS, FASM64PQA |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM64PQS, FSM64PQA, FSM64QM, FSM64Q, FASM64PQS, FASM64PQA | FSM64PQS, FSM64PQA, FSM64QM, FSM64Q, FASM64PQS, FASM64PQA |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The data for the EPROM should be at [$9000-$AFFF] and [$D000-$FFFF]and the data for the EEPROM should be at [$B600-$B7FF] in the Buffer.The data for the CONFIG Register should be at $103F. The Blank state of CONFIG Register is $0F.The CONFIG Register must be programmed by Device Secure command.The Device Configure options must be set before run the Device Secure command.The Device Configure options cannot be Verified.If EEPROM is disabled the Read command fills $FF in EEPROM memory area[$B600-$B7FF].Users should take great care before clearing the NOSEC bit in the CONFIG Register on one-timeprogrammable (OTP) devices. Since these devices are not erasable it is impossible to read themany more.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | QFP(64) |
| Part Number | MC68HC711E20MFU2 |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |