Freescale Semiconductor MC68HC908GP32CP DIP(40) Device
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48DP | FSM48DP |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48DP | FSM48DP |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: This algorithm has been updated per manufacturers specificationnecessitating the use of a new socket module SM48DP.Microcontroller with FLASH.The following describes the buffer setup:The addresses $8000 to $FDFF are FLASH .The addresses $FFDC to $FFFF are user vectors.The address $FF7E is FLASH Block Protect Register.The device has an eight bytes security feature from $FFF6 to $FFFD.To read a programmed device with the security feature the bufferor Device/Configure must be filled with correct data from address $FFF6 to $FFFD. Incorrect data at these locations will prevent access to the device.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | DIP(40) |
| Part Number | MC68HC908GP32CP |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |