Freescale Semiconductor MC68HC908GZ60CFA QFP(48) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR48TQZ, FASM48TQL, WASM48TQL (repl.) | FX4ASMR48TQZ, FASMR48TQZ, FASM48TQL, WASM48TQL (repl.), LX4ASMR48TQZ (repl.) | WASM48TQL, LX4ASMR48TQZ |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR48TQZ, FASMR48TQZ, FSM48TQL, FASM48TQL, WASM48TQL (repl.) | FX4SMR48TQZ, FSMR48TQZ, FX4ASMR48TQZ, FASMR48TQZ, FSM48TQL, FASM48TQL, WASM48TQL (repl.), LX4ASMR48TQZ (repl.) | WASM48TQL, LX4ASMR48TQZ |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR48TQZ, FASMR48TQZ, FSM48TQL, FASM48TQL, WASM48TQL (repl.) | FX4SMR48TQZ, FSMR48TQZ, FX4ASMR48TQZ, FASMR48TQZ, FSM48TQL, FASM48TQL, WASM48TQL (repl.), LX4ASMR48TQZ (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with FLASH. The following describes the Buffer setup: The addresses $0462 to $04FF are FLASH-2. The addresses $0980 to $1B7F are FLASH-2. The addresses $1E20 to $7FFF are FLASH-2. The addresses $8000 to $FDFF are FLASH-1. The address $FF80 is the FL1BPR register. The address $FF81 is the FL2BPR register. The addresses $FFCC to $FFFF are user vectors. This device has an eight bytes security feature from $FFF6 to $FFFD. To read a programmed device with the security feature the Data Pattern or Device Configure must be filled with correct data from address $FFF6 to $FFFD. Incorrect data at these locations will prevent access to the device.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | QFP(48) |
| Part Number | MC68HC908GZ60CFA |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |